现代纺织技术 ›› 2026, Vol. 34 ›› Issue (10): 64-73.DOI: 10.12477/j.att.202602024

• • 上一篇    下一篇

氮掺杂碳负载Zn催化PET甲醇解的性能和机理

  

  1. 1. 浙江理工大学纺织纤维材料与加工技术国家地方联合工程实验室,浙江杭州 310018;2. 浙江省现代纺织技术创新中心,浙江绍兴 312000
  • 出版日期:2026-10-01 网络出版日期:2026-10-20
  • 基金资助:
    浙江省重点研发计划项目(2023C01095)

Catalytic performance and mechanism of PET methanolysis over N-doped carbon-supported Zn catalysts

  1. 1. National Engineering Lab for Textile Fiber Materials and Processing Technology, Zhejiang Sci-Tech University, Hangzhou 310018, China; 2. Zhejiang Provincial Innovation Center of Advanced Textile Technology, Shaoxing 312000, China
  • Published:2026-10-01 Online:2026-10-20

摘要: 针对废弃聚对苯二甲酸乙二醇酯(PET)化学回收中非均相催化剂易团聚、循环稳定性差等问题,提出一种以锌基金属有机框架(ZIF-8)为前驱体的高温碳化策略,制备了氮掺杂碳负载的高分散锌基催化剂(ZIF-8-NC),并将其应用于废弃 PET 的甲醇解回收。 采用 SEM、XRD 及 XPS 等进行性能表征与测试分析,结果表明:在 200 ℃ 、150 min 的最优反应条件下,ZIF-8-NC 催化剂展现出较好的催化活性,PET 转化率高达99. 99%,目标产物对苯二甲酸二甲酯(DMT)产率达 83. 96%。 该催化剂具有较好的循环使用性能,经 9 次连续催化循环后 PET 转化率仍维持在 90. 7%。 研究结果可为开发高效、低成本的化学回收聚酯塑料的技术提供一种新的实践途径。

关键词: 聚对苯二甲酸乙二醇酯, 催化, 甲醇解, 金属有机框架, 对苯二甲酸二甲酯

Abstract: Poly(ethylene terephthalate) (PET) is one of the most widely used polyester plastics and plays an important role in packaging, fibers, and films. However, the large-scale accumulation of discarded PET has posed serious environmental and ecological challenges. Methanolysis, which converts waste PET into monomers such as dimethyl terephthalate (DMT) or other value-added chemicals, is widely regarded as a sustainable route for PET recycling. Even so, existing catalytic systems for PET methanolysis still face several limitations, including the aggregation or loss of active metal sites, poor cycling stability, and difficulties in catalyst recovery, all of which restrict catalytic efficiency and practical application. Accordingly, the development of efficient, stable, and recyclable zinc-based heterogeneous catalysts has become an important direction in PET methanolysis. In view of these issues, this work employed the Zn-based metal-organic framework ZIF-8 as a precursor to construct highly dispersed zinc catalysts supported on N-doped carbon. A series of ZIF-8-NC catalysts were prepared by carbonizing ZIF-8 under a nitrogen atmosphere at 550 °C, 700 °C, and 850 °C, and their performance in the methanolysis of waste PET was evaluated. SEM, TEM, XRD, and XPS were used to examine how carbonization temperature affected catalyst structure, composition, and the dispersion state of zinc atoms, and the catalytic behaviors of the resulting materials in PET methanolysis were further compared. Among them, ZIF-8-700, obtained at 700 °C, showed the best depolymerization performance. Under the optimal conditions of 200 °C, 150 min, and a catalyst loading of 5%, the PET conversion reached 99.99% and the DMT yield reached 83.96%. FTIR, ¹H NMR, DSC, and TGA analyses confirmed that the obtained DMT had high purity and good thermal stability. Mechanistic investigation showed that the highly dispersed Lewis acidic Zn sites acted cooperatively with nitrogen heteroatoms, enabling the simultaneous activation of methanol molecules and PET ester bonds and thereby accelerating the depolymerization process. Owing to the strong anchoring effect of the N-doped carbon support on Zn species, ZIF-8-700 exhibited excellent cycling stability, maintaining a PET conversion of 90.7% after nine consecutive runs. This Zn-based MOF-derived catalyst not only overcomes the problems of metal particle aggregation and active-component loss commonly encountered in conventional supported catalysts but also strengthens the interaction between the metal and the support. These results provide a new basis for the design of catalysts for PET methanolysis and offer useful theoretical and technical guidance for the development of advanced catalysts for the high-value recycling of other polyesters.

Key words: polyethylene terephthalate, catalysis, methanolysis, metal-organic frameworks, dimethyl terephthalate

中图分类号: