Research on construction and performance of integrated ink based on blue light curing

doi:10.19398/j.att.202011022

Advanced Textile Technology ›› 2022, Vol. 30 ›› Issue (1): 137-145.DOI: 10.19398/j.att.202011022

• Dyeing and Finishing & Chemical Engineering • Previous Articles Next Articles

Research on construction and performance of integrated ink based on blue light curing

YAN Kai^1a, LUO Xun^1a, ZHANG Qiyang², WANG Chenglong^1b, QIAO Luyang^1a, ZHENG Jinhuan^1b()

1a. Key Laboratory of Advanced Textile Materials and Preparation Technology of Ministry of Education; 1b. Engineering Research Center of Ecological Dyeing and Finishing Technology of Ministry of Education, Zhejiang Sci-Tech University, Hangzhou 310018, China
2.Shaoxing Eco-Environmental Education and Aircraft Platoon Center, Shaoxing 312000, China

Received:2020-11-30 Online:2022-01-10 Published:2021-04-19
Contact: ZHENG Jinhuan

基于蓝光固化的PU-TiO₂一体化墨水构建及性能研究

闫凯^1a, 骆训^1a, 章奇羊², 王成龙^1b, 乔路阳^1a, 郑今欢^1b()

1.浙江理工大学,a.先进纺织材料与制备技术教育部重点实验室;b.生态染整技术教育部工程研究中心,杭州 310018
2.绍兴市生态环境宣教与机排中心,浙江绍兴 312000

通讯作者: 郑今欢
作者简介:闫凯(1995-),男,山西文水人,硕士研究生,主要从事生态染整技术方面的研究。
基金资助:
浙江省基础公益研究计划项目(LGF21E030004);浙江省教育厅科研项目资助项目(20200065-F);浙江理工大学科研启动基金项目(19012097-Y)

Abstract

Abstract:

In order to improve the migration and aggregation of titanium dioxide and enhance its anchoring effect on coating ink, we prepared an integrated coating of polyurethane acrylate-based titanium dioxide (PU-TiO2) was made. The PU-TiO₂ integrated coating was made into a light-cured PU-TiO₂ integrated coating ink, and the light-cured PU-TiO₂integrated coating ink system and its properties were studied. Through UV spectrum analysis and analysis of photopolymerization properties, it is concluded that when the mass ratio between the initiator camphorquinone (CQ) and the co-initiator 4-ethyl dimethylaminobenzoate (EDB) is 6:4, and the mass fraction of the initiator system accounts for 1.5% of the ink system, the ink performance reaches the best; through an analysis of photopolymerization properties, rheological properties and film tensile properties, it can be seen that the integrated coating ink is a typical Newtonian fluid. When the mass ratio between the coating and the monomer is 4:6, the ink performance is the best. Compared with the light-cured ink prepared by unmodified titanium dioxide, the migration and aggregation of the integrated coating ink are significantly improved during the curing, and the tensile properties and dispersion stability of the film are also improved.

Key words: PU-TiO₂, coating ink, blue light curing, integration

摘要：

为了改善二氧化钛迁移聚集现象并提高其在涂料墨水中的锚固作用,自制了聚氨酯丙烯酸酯基二氧化钛(PU-TiO₂)一体化涂料。将PU-TiO₂一体化涂料制成光固化PU-TiO₂一体化涂料墨水,并对光固化PU-TiO₂一体化涂料墨水体系及性能进行了研究。通过紫外光谱分析和光聚合性能分析得出,当引发剂樟脑醌(CQ)与助引发剂4-二甲基氨基苯甲酸乙酯(EDB)之间的质量比为6:4,且引发体系占墨水体系质量分数比例为1.5%时,墨水性能达到最佳;通过光聚合性能、流变性能和膜拉伸性能分析,可知一体化涂料墨水属于典型的牛顿型流体,当涂料与单体之间的质量比为4:6时,墨水性能达到最佳。相较于未改性二氧化钛制得的光固化墨水,一体化涂料墨水在固化过程中迁移聚集现象明显改善,且膜拉伸性能和分散稳定性能得到提升。

关键词: PU-TiO₂, 涂料墨水, 蓝光固化, 一体化

CLC Number:

TS194.2

YAN Kai, LUO Xun, ZHANG Qiyang, WANG Chenglong, QIAO Luyang, ZHENG Jinhuan. Research on construction and performance of integrated ink based on blue light curing[J]. Advanced Textile Technology, 2022, 30(1): 137-145.

闫凯, 骆训, 章奇羊, 王成龙, 乔路阳, 郑今欢. 基于蓝光固化的PU-TiO₂一体化墨水构建及性能研究[J]. 现代纺织技术, 2022, 30(1): 137-145.

Figures/Tables 11

Fig.1 The construction of blue light curable integrated coating ink and schematic of light curing

Fig.2 UV-Vis spectrum analysis of initiating system ratio

Fig.3 The photopolymerization performance curve of the initiator system ratio

Fig.4 The photopolymerization performance curve of the initiator system concentration

Fig.5 Rheological properties curve of PU-TiO2 and monomer compound ratio

Fig.6 The photopolymerization performance curve of PU-TiO2 and monomer ratio

Fig.7 The stress-strain curve of the cured film of PU-TiO2 and monomer ratio

Fig.8 Polymerization performance curve of titanium dioxide ink before and after modification

Tab.1 Analysis of sedimentation performance of titanium dioxide before and after modification

样品名称	时间	沉降效果
TiO₂	三周	沉降效果明显
PU-TiO₂	三周	沉降效果不明显

Fig.9 SEM pictures of cross-sections of cured titanium dioxide film before and after modification

Fig.10 Stress-strain curve of titanium dioxide light-cured film before and after modification

References 19

[1]	HUANG Y, CAO B, XU C, et al. Synthesis process control and property evaluation of a low-viscosity urethane acrylate oligomer for blue light curable ink of textile digital printing[J]. Textile Research Journal, 2015, 85(7):759-767. DOI URL
[2]	魏杰, 金养智. 光固化涂料[M]. 北京: 化学工业出版, 2005:13.
	WEI Jie, JIN Yangzhi. Light-curing Coatings[M]. Beijing: Chemical Industry Press, 2005:13.
[3]	SHAO J, HUANG Y, FAN Q. Visible light initiating systems for photopolymerization: Status, development and challenges[J]. Polymer Chemistry, 2014, 5(14):4195-4210. DOI URL
[4]	ZHANG J F, LI X F, LI X H, et al. Synthesis of core-shell acrylic-polyurethane hybrid latex as binder of aqueous pigment inks for digital inkjet printing[J]. Progress in Natural Science: Materials International, 2012, 22(1):71-78. DOI URL
[5]	FU S H, ZHANG L P, TIAN A L, et al. Preparation of a novel colorant with branched poly(styrene-alt-maleic anhydride) for textile printing[J]. Industrial & Engineering Chemistry Research, 2014, 53(24):10007-10014. DOI URL
[6]	FU S H, XU C H, DU C S, et al. Encapsulation of C.I. Pigment blue 15:3 using a polymerizable dispersant via emulsion polymerization[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2011, 384(1-3): 68-74. DOI URL
[7]	ELGAMMAl M, SCHNEIDER R, GRADZIELSKI M. Development of self-curable hybrid pigment inks by miniemulsion polymerization for inkjet printing of cotton fabrics[J]. Dyes and Pigments, 2016, 133: 467-478. DOI URL
[8]	HAKEIM O A, ARAFAA A A, ZAHRANB MK, et al. UV-curable encapsulation of surface-modified organic pigments for inkjet printing of textiles[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2014, 447(447): 172-182. DOI URL
[9]	GUAN Y, TAWIAH B, ZHANG L P, et al. Preparation of UV-cured pigment/latex dispersion for textile inkjet printing[J]. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 2014, 462: 90-98. DOI URL
[10]	付少海, 王大同, 杜长森, 等. 提高喷墨印花颜料墨水印花牢度的方法[J]. 纺织学报, 2015, 36(02):141-147.
	FU Shaohai, WANG Datong, DU Changsen, Improve color fastness of inkjet printing textiles using pigment ink[J]. Journal of Textile Research, 2015, 36(02):141-147.
[11]	CIRIMINNA R, FIDALGO A, PANDARUS V, et al. The sol-gel route to advanced silica-based materials and recent applications[J]. Chemical Reviews, 2013, 113(8): 6592-6620. DOI URL
[12]	FU S H, Du C S, ZHANG M J, et al. Preparation and properties of polymer-encapsulated phthalocyanine blue pigment via emulsion polymerization[J]. Progress in Organic Coatings, 2012, 73(2): 149-154. DOI URL
[13]	HAKEIM O A, FAN Q G, KIM YK. Encapsulation of Pigment Red 122 into UV-curable resins via a mini-emulsion technique[J]. Pigment & Resin Technology, 2010, 39(1): 3-8.
[14]	YUAN J J, XING W T, GU G X, et al. The properties of organic pigment encapsulated with nano-silica via layer-by-layer assembly technique[J]. Dyes & Pigments, 2008, 76(2):463-469.
[15]	HAROUN A A, DIAB H A, HAKEIM O A. Cellulosic fabrics printing with multifunctional encapsulated phthalocyanine pigment blue using phase separation method[J]. Carbohydrate Polymers, 2016, 146:102-108. DOI URL
[16]	JAKUBIAK J, SIONKOWSKA A, et al. Isothermal photo differential scanning calorimetry: Crosslinking polymerization of multifunctional monomers in presence of visible light photoinitiators[J]. Journal of Thermal Analysis And Calorimetry, 2001, 65(2):435-443. DOI URL
[17]	CHEN J, SOUCEK M D. Ultraviolet curing kinetics of cycloaliphatic epoxide with real-time fourier transform infrared spectroscopy[J]. Journal of Applied Polymer Science, 2003, 90(9):2485-2499. DOI URL
[18]	CLARK S C, HOYLE C E. Photopolymerization of acrylates using N-aliphaticmaleides as photoinitiators[J]. Polymer, 1999, 40(18):5036-5072.
[19]	张婉, 黄蓓青, 魏先福. 单体对UV喷墨油墨体系固化速度的影响[J]. 包装工程, 2007(10):45-47.
	ZHANG Wan, HUANG Beiqing, WEI Xianfu. Effect of monomer on curing rate of UV-curable inkjet ink[J]. Packaging Engineering, 2007(10): 45-47.