现代纺织技术 ›› 2023, Vol. 31 ›› Issue (1): 221-231.DOI: 10.19398/j.att.202206038

• 染化工程 • 上一篇    下一篇

桑蚕丝织物蒸汽脱胶工艺及其性能

叶艳丽1, 郭佳兴1, 傅雅琴2,3, 陈文兴2, 江文斌1,2   

  1. 1.浙江理工大学纺织科学与工程学院(国际丝绸学院),杭州 310018;
    2.纺织纤维材料与加工技术国家地方联合工程实验室,杭州 310018;
    3.浙江理工大学湖州研究院有限公司,浙江湖州 313000
  • 收稿日期:2022-06-21 出版日期:2023-01-10 网络出版日期:2023-01-17
  • 通讯作者:江文斌,E-mail:hfjjwb@163.com
  • 作者简介:叶艳丽(1997—),女,浙江衢州人,硕士研究生,主要从事现代纺织加工技术与产品开发方面的研究。
  • 基金资助:
    财政部和农业农村部国家现代农业产业技术体系资助项目(2021)

Steam degumming process and properties of silk fabrics

YE Yanli1, GUO Jiaxing1, FU Yaqin2,3, CHEN Wenxing2, JIANG Wenbin1,2   

  1. 1. College of Textile Science and Engineering (International Institute of Silk) , Zhejiang Sci-Tech University, Hangzhou 310018, China;
    2. National Engineering Lab for Textile Fiber Materials and Processing Technology, Hangzhou 310018, China;
    3. Zhejiang Sci-Tech University Huzhou Research Institute Co., Ltd., Huzhou 313000, China
  • Received:2022-06-21 Published:2023-01-10 Online:2023-01-17

摘要: 针对桑蚕丝织物常规脱胶方法脱胶时效低且脱胶废液污染环境等问题,提出采用一种高效无污染的蒸汽处理方法对桑蚕丝双绉织物进行脱胶,通过对蒸汽脱胶工艺的温度和时间进行探究,并选择脱胶完全的两种蒸汽脱胶工艺与常规碳酸钠脱胶法处理得到的桑蚕丝织物性能对比分析。结果表明:在105 ℃和110 ℃条件下,织物脱胶率与脱胶时间呈线性正相关,在115、120、125 ℃条件下,织物脱胶率与脱胶时间呈对数函数关系;当蒸汽温度为125 ℃,脱胶处理45 min的蒸汽脱胶工艺得到的织物力学性能最优,悬垂性能略差,其微观形貌和二级结构均未受到明显影响,且脱胶总时长缩短了45.83%。该蒸汽脱胶工艺对桑蚕丝双绉织物的脱胶具有可行性和可控性,并提高了脱胶效率,同时可为代替传统脱胶工艺提供理论参考。

关键词: 桑蚕丝织物, 蒸汽脱胶, 脱胶率, 微观结构, 拉伸性能

Abstract: The culture derived from mulberry silk and its products has a long history. Silk fabrics are sought after by the public because of their characteristics of softness and fineness, soft brightness, flowing and draping, and skin-friendly property. Silk as a fabric raw material is composed of silk fibroin and sericin. Silk sericin is secreted by the silk gland of the silkworm and wrapped in the periphery of the silk fibroin, accounting for 20% ~ 30% of silk and playing a protective and sticky role. However, the presence of sericin can cause fabrics to feel stiff with poor softness, so most silk textiles on the market are refined to remove sericin. The principle of degumming is based on the difference between the characteristics that sericin is soluble in acid, alkali and hot solution, and that silk fibroin only swells but is not soluble in water, and the mulberry silk and its fabric are soaked in thermal degumming solution to realize the separation of sericin and silk fibroin. The common degumming methods will pollute the environment with the degumming waste liquid, and the sericin in the waste liquid is not easy to recycle, leading to the waste of resources. On the other hand, the storage conditions of biological enzymes are strict, which leads to the increase of degumming cost. Other degumming methods also have problems such as low debonding efficiency and high equipment requirements. Therefore, it is urgent to explore a degumming method that is efficient to clean and can be effectively controlled in mulberry silk fabrics.
As heating changes water from liquid to saturated water vapor with extremely high energy and strong penetration ability, and the temperature of saturated water vapor is controllable, it also presents the advantages of efficient and uniform degumming in the field of hemp fiber degumming. Therefore, in view of the above problems, we proposed a new process of clean and efficient steam degumming without any additives and explored the controllability of degumming silkworm silk fabrics treated by water vapor, which can reduce the waste of water resources, avoid the pollution of chemical waste liquid and control the degumming effect. In this paper, the mulberry silk crepe de chine fabric was taken as the degumming object, and the degumming rate of the mulberry silk fabric under different conditions was analyzed by controlling different steam temperatures and steam degumming times by using a single factor experimental method. The steam degumming process that can be completely degummed was selected, and the sodium carbonate degumming method was used as the control group to analyze and compare the micromorphology, secondary structure, tensile properties and drape properties of the mulberry silk fabrics after degumming. The results show that at the steam temperatures of 105 ℃ and 110 ℃, the fabric degumming rate is linearly positively correlated with the debonding time. Under the conditions of 115, 120 and 125 ℃, the fabric degumming rate and degumming time are logarithmically functioned. When the steam temperature is 125 ℃ and the degumming time is 45 min, the mechanical properties of the silk fabric are the best, and the drape performance is slightly poor. The microstructure and secondary structure are not significantly affected, and the degumming efficiency increases by 45.83%.
The new steam degumming process is feasible and controllable for the degumming of mulberry silk crepe de chine fabric and improves the degumming efficiency. This new degumming process makes it possible to replace conventional chemical degumming, and also provides a theoretical basis for the innovation of debonding methods in the industry.

Key words: mulberry silk fabric, steam degumming, degumming rate, microstructure, tensile property

中图分类号: