多梳经编汽车顶棚织物的设计与仿真

doi:10.19398/j.att.202103049

现代纺织技术 ›› 2022, Vol. 30 ›› Issue (4): 149-155.DOI: 10.19398/j.att.202103049

多梳经编汽车顶棚织物的设计与仿真

唐纱丽, 陈慰来, 马晨

浙江理工大学纺织科学与工程学院(国际丝绸学院),杭州 310018

收稿日期:2021-03-30 出版日期:2022-07-10 网络出版日期:2022-08-25
通讯作者:陈慰来,E-mail:wlchen193@163.com
作者简介:唐纱丽(1997-),女,湖南邵阳人,硕士研究生,主要从事现代纺织技术在新产品应用方面的研究。

Design and simulation of multi bar warp knitted automobile roof fabric

TANG Shali, CHEN Weilai, MA Chen

College of Textile Science and Engineering (International Institute of Slik), Zhejiang Sci-Tech University, Hangzhou 310018, China

Received:2021-03-30 Published:2022-07-10 Online:2022-08-25

摘要/Abstract

摘要： 汽车顶棚的美观会直接影响到顾客的购买欲望,为了改善汽车顶棚材料的花纹效果,使用WKCAD经编工艺设计软件,在满足汽车内饰基本性能的基础上,分别设计三梳和四梳经编组织,对其花纹组织结构进行优化设计及仿真,采用普通涤纶和阳离子涤纶丝作为原料,分析不同原料产生的花纹效果。结果表明:使用阳离子涤纶丝作为前梳或前两梳原料,经染色后产生的花纹设计效果更好;且一个完整循环中,梳栉跨横列数越多,所展现的花纹效果更好,其中四梳织物相较于三梳而言,更适合特殊纹样设计。

关键词: 针织物, 经编结构, 多梳, 汽车顶棚, 面料设计

Abstract: The aesthetics of automobile roof will directly affect customers' desire to buy. In order to improve the pattern effect of automobile roof materials, three-comb and four-comb warp knitted structures were designed respectively using WKCAD warp knitting process design software on the precondition of ensuring the basic performance of automobile interior. Optimized design and simulation of the pattern structure were conducted. Ordinary polyester and cationic polyester were used as raw materials to analyze the effects of patterns produced by different raw materials. The results show that when cationic polyester fiber was used as the raw material of the front comb or the first two combs, the pattern design effect after dyeing was better. In a complete cycle, the more the number of rows crossed by the comb bar, the better the pattern design effect. The four-comb fabric is more suitable for the special pattern design than the three-comb fabric.

Key words: knitted fabric, warp knitted structure, multi bar, automobile roof, fabric design

中图分类号:

TS184.3

唐纱丽, 陈慰来, 马晨. 多梳经编汽车顶棚织物的设计与仿真[J]. 现代纺织技术, 2022, 30(4): 149-155.

TANG Shali, CHEN Weilai, MA Chen. Design and simulation of multi bar warp knitted automobile roof fabric[J]. Advanced Textile Technology, 2022, 30(4): 149-155.

参考文献

[1] 郑静,夏风林,陈晴.经编提花汽车座椅面料的设计与开发[J].纺织导报,2017(5):80-82.
ZHANG Jing, XIA Fenglin, CHEN Qing. Design and development of warp-knitted jacquard car seat fabrics[J]. China Textile Leader, 2017(5): 80-82.
[2] 钱伯章.丰田汽车公司汽车内饰采用生物聚酯生态塑料[J].合成纤维,2010,39(12):50-51.
QIAN Bozhang. Toyota motor company adopts bio polyester ecological plastic for car interior[J]. Synthetic Fiber in China, 2010, 39(12): 50-51.
[3] 吴盼盼.新材料新技术在汽车内饰面料中的应用[J].时代汽车,2019(19):98-99.
WU Panpan. Application of new materials and new technologies in automotive interior fabrics[J]. Auto Time, 2019(19): 98-99.
[4] 戴钧明,黄象安.汽车用纺织品的发展[J].纺织科学研究,1999,10(4):32-35,41.
DAI Junming, HUANG Xiang'an. Development of automotive textiles[J]. Textile Science Research, 1999, 10(4): 32-35, 41.
[5] 张卫红,赵建勇.汽车顶棚面料的种类及应用[J].汽车工程师,2015(4):59-60.
ZHANG Weihong, ZHAO Jianyong. Type and application of vehicle roof lining fabrics[J]. Auto Engineer, 2015(4): 59-60.
[6] 孙成武,刘婷婷,陈林萍,等.汽车顶棚设计[J].汽车零部件,2014(3):59-63.
SUN Chengwu, LIU Tingting, CHEN Linping, et al. Top-roof design in automobile[J]. Automobile Parts, 2014(3): 59-63.
[7] CHEN W L, WAN L Y, ZHAN W H. Study on elongation properties of car roof interior fabric[J]. Applied Mechanics and Materials, 2014, 556-562: 36.
[8] 张建福.经编汽车内饰面料的开发和质量控制[J].纺织服装周刊,2008(3):67.
ZHANG Jianfu. Development and quality control of warp knitted automobile interior fabric[J]. Textile Apparel Weekly, 2008(3): 67.
[9] 任恒良.高速经编机织造生产经验[J].针织工业,2011(1):6-7.
REN Hengliang. Weaving experience of high speed warp knitting machine[J]. Knitting Industries, 2011(1): 6-7.
[10] 夏风林.新型经编装备技术与发展趋势[J].纺织导报,2010(9):55-61.
XIA Fenglin. New warp-knitting machinery technology and development tendency[J]. China Textile Leader, 2010(9): 55-61.
[11] 吴双全,王楠,承洁,等.汽车内饰纤维材料的开发现状与发展趋势[J].针织工业,2019(11):1-5.
WU Shuangquan, WANG Nan, CHENG Jie, et al. Development status and trends of automobile interior decorative fiber materials[J]. Knitting Industries, 2019(11): 1-5.
[12] 韩春艳,吴旭华,刘海霆,等.阳离子可染涤纶短纤维染色性能研究[J].合成技术及应用,2018,33(1):42-48.
HAN Chunyan, WU Xuhua, LIU Haiting, et al. Study on dyeing properties of cationic dyeable polyester staple fiber[J]. Synthetic Technology and Application, 2018,33(1): 42-48.
[13] 易定红.Tricot经编起绒汽车顶棚内饰织物结构及性能研究[D].杭州:浙江理工大学,2014.
YI Dinghong. Study on Structure and Performance of Tricot Warp Knitting PileFabric for Car Proof Interior[D]. Hangzhou: Zhejiang Sci-Tech University, 2014.

[1]	胡新荣, 汪卓, 刘军平, 彭涛, 李敏, 李丽. 基于自适应网格划分的针织物仿真[J]. 现代纺织技术, 2022, 30(5): 21-30.
[2]	陆叶，邵怡沁，陈慰来. 纳米银抗菌针织物的制备与性能研究[J]. 现代纺织技术, 2021, 0(6): 67-71.
[3]	周子滢，段茹雪，刘宁娟，贾可，刘玮. 碳纳米管涂层双罗纹织物的电磁屏蔽性能[J]. 现代纺织技术, 2021, 0(4): 43-50.
[4]	陆水峰，张芳. 液体固色碱棉针织物冷轧堆固色应用研究[J]. 现代纺织技术, 2020, 0(5): 73-76.
[5]	李双双，傅雅琴，欧阳舴艋. 微波处理对丝针织物抗起毛起球性能的影响[J]. 现代纺织技术, 2020, 0(2): 20-24.
[6]	陆水峰. 复合氧漂活化体系在棉针织物冷轧堆中的应用[J]. 现代纺织技术, 2020, 0(2): 80-84.
[7]	陶开鑫，俞成丙，刘引烽，梁珊珊. 基于LS SVM棉针织物轧烘轧蒸染色工艺的预测模型[J]. 现代纺织技术, 2020, 0(1): 71-75.
[8]	吴臣仁，吕汪洋. 铜配合物用于棉针织物低温酶氧一浴漂白[J]. 现代纺织技术, 2020, 0(1): 76-81.
[9]	徐国平，刘玉，范小红，丁新波. 棉/维股线及其针织物的退维工艺研究[J]. 现代纺织技术, 2019, 0(06): 42-46.
[10]	朱生群，袁嫣红，李跃珍. 基于TexGen的筒状纬编针织物的三维仿真[J]. 现代纺织技术, 2019, 0(06): 57-61.
[11]	孙淑娟，蒋苏斌，杜平凡. 腈纶仿羊绒纱线的抗静电整理及其针织物的性能研究[J]. 现代纺织技术, 2018, 0(06): 47-50.
[12]	史佳玲，王利君. 风速与含湿率对棉针织物热湿传递性能的影响[J]. 现代纺织技术, 2018, 0(04): 25-30.
[13]	杜霞，任学勤，陈少兰. 结子线的纺制及其针织物图案研究[J]. 现代纺织技术, 2018, 0(03): 34-37.
[14]	杨一舟，赵俐. 活性蓝K-3R对扎染黏胶针织物的染色性能研究[J]. 现代纺织技术, 2018, 0(02): 71-75.
[15]	孙淑娟，张帆，杜平凡. 纱线防水整理及其针织面料性能研究[J]. 现代纺织技术, 2017, 0(06): 76-80.

多梳经编汽车顶棚织物的设计与仿真

Design and simulation of multi bar warp knitted automobile roof fabric

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics