Advanced Textile Technology ›› 2022, Vol. 30 ›› Issue (3): 60-64.DOI: 10.19398/j.att.202103001

• MaterialsEngineering • Previous Articles     Next Articles

Exploration on spinning technology of graphene oxide modified polyester

WANG Xiaohua, WANG Chunbo, WANG Bingkui, Feng Weifang   

  1. Zhejiang Zhink Chemical Fiber Co., Ltd., Hangzhou 311223, China
  • Received:2021-03-01 Revised:2021-08-26 Online:2022-05-10 Published:2022-05-26

氧化石墨烯改性聚酯纺丝加工技术探究

王小华, 汪春波, 王炳奎, 冯卫芳   

  1. 浙江正凯化纤有限公司,杭州 311223
  • 作者简介:王小华(1983-),男,湖北广水人,硕士研究生,主要从事新材料及纺丝加工技术方面的研究。

Abstract: Graphene oxide modified polyester fiber has a variety of functions beneficial to human health. This paper conducts in-depth study of the spinning technology of graphene oxide modified polyester from five aspects of crystallization and drying, spinning melt preparation, oiling, draw-texturing and tensile mechanical properties of products. The results show that: the crystallization and drying are implemented in accordance with the conventional polyester chip process. The preparation of the spinning melt is free from the influence of gas atmosphere. The temperature range is wide, but the residence time in the screw has a great influence on the viscosity drop. The amount of spinning oil is significantly higher than that of the conventional varieties. During the tensile deformation, there exist some problems, such as endless bottom unwinding and end breakage. The tensile mechanical properties of POY and DTY are relatively low, while the strength and breaking elongation of POY are obviously lower than those of conventional products, which are not conducive to stable post-processing. The research results are expected to provide a reference for the industrial growth of graphene oxide modified polyester.

Key words: graphene oxide, modified polyester, spinning process, crystallization and drying, spinning melt, oiling, draw-texturing

摘要: 氧化石墨烯改性聚酯纤维具有多种对人体健康有益的功能。从结晶干燥、纺丝熔体制备、上油、拉伸变形、产品拉伸力学性能与结构5个方面,对氧化石墨烯改性聚酯纺丝加工技术深入探究。结果表明:结晶干燥按常规聚酯切片工艺执行;纺丝熔体制备不受气体氛围的影响,温度区间宽,但在螺杆中的停留时间对黏度降有很大影响;纺丝上油量明显高于常规品种;拉伸变形时,出现底部退绕不尽、过尾断头的问题;POY、DTY拉伸力学性能偏低,其中,POY的强度及断裂伸长明显低于常规产品,不利于后道加工的稳定。研究结果可为氧化石墨烯改性聚酯的产业化增速提供参考。

关键词: 氧化石墨烯, 改性聚酯, 纺丝工艺, 结晶干燥, 纺丝熔体, 上油, 拉伸变形

CLC Number: