Advanced Textile Technology ›› 2022, Vol. 30 ›› Issue (2): 222-228.DOI: 10.19398/j.att.202103033

• Apparel Engineering • Previous Articles    

Effect of waist structure on X dress silhouette

WANG Lia, SUN Yinga, LIU Zhenga,b,c   

  1. a. School of Fashion Design & Engineering, P. R. Zhejiang Sci-Tech University, Hangzhou 310018, China
    b. Zhejiang Provincial Research Center of Clothing Engineering Technology, P. R. Zhejiang Sci-Tech University, Hangzhou 310018, China
    c. Key Laboratory of Silk Culture Inheriting and Products Design Digital Technology Ministry of Culture, P. R. Zhejiang Sci-Tech University, Hangzhou 310018, China
  • Received:2021-03-22 Online:2022-03-10 Published:2021-08-04

收腰结构对X连衣裙廓形的影响

王利a, 孙迎a, 刘正a,b,c   

  1. a.服装学院, 浙江理工大学,杭州 310018
    b.浙江省服装工程技术研究中心, 浙江理工大学,杭州 310018
    c.丝绸文化传承与产品设计数字化技术文化和旅游部重点实验室, 浙江理工大学,杭州 310018
  • 作者简介:王利(1994-),女,河南郑州人,硕士研究生,主要从事数字化服装技术方面的研究。

Abstract:

To investigate the influence of waist structure on the form of X dress, 30 X-silhouette waist-structured dresses with the same specifications and different fabrics were made. The waistline width and hem width of the dress were measured using [TC]2 3D scanner and 3D modeling software. The analysis was carried out by the waist waistline width after wearing the dress, the ratio of the difference between the waistline width and the waist distance, and the subjective evaluation. The results indicated that the waistline width of 3D pleated waist structure was 1.54 cm narrower than that of upper and lower waist structure. The wide side waist structure had the widest bottom width. The single-sample t-test showed that the sig value of the back seam waist structure with the highest X-silhouette feature score was 0.012, and its mean value in X-silhouette feature evaluation was significantly higher than the overall mean value.

Key words: X-silhouette, waist structure, waistline width, dress

摘要:

为探索收腰结构对X连衣裙着装形态的影响,制作同种规格、不同面料与收腰结构的30件X廓形连衣裙。利用[TC]2三维扫描仪和三维建模软件测量连衣裙腰围宽度和摆围宽度,从连衣裙着装后腰围宽度、腰摆宽度差值与腰摆距离的比值和主观评价三个方面进行分析。结果表明:立体褶裥收腰所呈现的腰围宽度比上收下放收腰窄了1.54 cm;宽边收腰的下摆最宽;在单样本t检验中,X廓形特征分值最高的刀背缝收腰的sig值为0.012,它的X廓形特征评价均值显著高于总体均值。

关键词: X廓形, 收腰结构, 腰围宽度, 连衣裙

CLC Number: