Preparation and interfacial properties of UHMWPE fibers modified by polyphenol & amino silane

doi:10.19398/j.att.202203065

Advanced Textile Technology ›› 2022, Vol. 30 ›› Issue (6): 63-72.DOI: 10.19398/j.att.202203065

• Materials Engineering • Previous Articles Next Articles

Preparation and interfacial properties of UHMWPE fibers modified by polyphenol & amino silane

WANG Weihai¹, CHEN Hong², HUANG Zhichao¹, YAO Xiangjiang², WU Jindan¹, QI Dongming¹

1. Zhejiang Provincial Engineering Research Center for Green and Low-carbon Dyeing & Finishing, Zhejiang Sci-Tech University, Hangzhou 310018, China;
2. Zhejiang Qianxilong Special Fiber Co., Ltd. , Yongkang 321300, China

Received:2022-03-28 Online:2022-11-10 Published:2022-11-16

多酚-氨基硅烷改性超高分子量聚乙烯纤维的制备及其界面性能

汪维海¹, 陈宏², 黄志超¹, 姚湘江², 吴金丹¹, 戚栋明¹

1.浙江理工大学绿色低碳染整技术浙江省工程研究中心,杭州 310018;
2.浙江千禧龙纤特种纤维股份有限公司,浙江永康 321300

通讯作者: 吴金丹,E-mail:wujindan@zstu.edu.cn
作者简介:汪维海(1996—),男,河南濮阳人,硕士研究生,主要从事纤维改性方面的研究。
基金资助:
浙江省重点研发计划项目(2021C01124)

Abstract

Abstract: In order to improve the interfacial shear strength between ultra-high molecular weight polyethylene (UHMWPE) fiber and epoxy resin, three polyphenols (dopamine, catechol and tannic acid) were used for the surface modification of UHMWPE fiber, and then 3-(aminopropyl)triethoxysilane (KH550) was grafted with the introduced reactive functional groups. The surface morphology, element composition and crystallinity of the modified fiber were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The effects of polyphenol type, silane reaction concentration and reaction time on interfacial shear strength were investigated, and the optimum modification conditions were determined. It was found that the modification process had no significant effect on the crystallinity and mechanical strength of the fiber. The interfacial shear strength between the modified fiber and epoxy resin was improved significantly. The interfacial shear strength between fiber modified by dopamine and amino silane (3%, 3 h) and epoxy resin increased by 134.56%.

Key words: dopamine, catechol, tannin, silane coupling agent, ultra-high molecular weight polyethylene fiber, interfacial shearing strength

摘要： 为提高超高分子量聚乙烯(UHMWPE)纤维与环氧树脂的界面剪切强度,选用3种多酚类化合物(多巴胺、邻苯二酚和单宁酸)对UHMWPE纤维进行表面改性,再利用引入的反应性官能团接枝3-氨丙基三乙氧基硅烷(KH550)。采用扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、X射线衍射(XRD)等测试手段对改性前后纤维的表面形貌、元素组成、结晶度等理化性质进行表征,探究多酚化合物种类、硅烷反应浓度和反应时间等因素对界面剪切强度的影响,并确定最佳改性条件。结果表明:多酚改性及氨基硅烷二次改性对纤维本体的结晶度和力学强度未造成显著影响;改性后的纤维和环氧树脂之间的界面剪切强度均有显著提高,质量分数3%的多巴胺-氨基硅烷改性3 h的纤维界面增强效果最佳,界面剪切强度提高了134.56%。

关键词: 多巴胺, 邻苯二酚, 单宁酸, 硅烷偶联剂, 超高分子量聚乙烯纤维, 界面剪切强度

CLC Number:

TS102.6

WANG Weihai, CHEN Hong, HUANG Zhichao, YAO Xiangjiang, WU Jindan, QI Dongming. Preparation and interfacial properties of UHMWPE fibers modified by polyphenol & amino silane[J]. Advanced Textile Technology, 2022, 30(6): 63-72.

汪维海, 陈宏, 黄志超, 姚湘江, 吴金丹, 戚栋明. 多酚-氨基硅烷改性超高分子量聚乙烯纤维的制备及其界面性能[J]. 现代纺织技术, 2022, 30(6): 63-72.

References

[1] SI X J, LIU S J, LIU D H, et al. The preparation and study on UHMWPE/epoxy gel-spun fibres[J]. Advanced Materials Research, 2008(47-50): 722-726.
[2] HUANG W, WANG Y, XIA Y. Statistical dynamic tensile strength of UHMWPE-fibers[J]. Polymer, 2004, 45(11): 3729-34.
[3] 郭云竹.高性能纤维及其复合材料的研究与应用[J].纤维复合材料,2017,34(1):7-10.
GONG Yunzhu. Research and application of high perfor-mance fiber and composite materials[J]. Fiber Composites, 2017, 34(1): 7-10.
[4] TENG C, YU M. Grafting of multifunctional groups onto the surface of high-strength polyethylene fibers and the interface of their composites[J]. Journal of Applied Polymer Science, 2005, 97(2): 449-54.
[5] 乔石,薛涛,孟家光,等.液态氧化法改性UHMWPE纤维表面的研究[J].合成纤维,2016,45(4):33-38.
QIAO Shi, XUE Tao, MENG Jiaguang, et al. The research of liquid oxidation on UHMWPE fiber surface[J]. Synthetic Fiber in China, 2016, 45(4): 33-38.
[6] 魏冬,薛涛,孟家光,等.铬酸改性超高相对分子质量聚乙烯纤维的研究[J].合成纤维,2016,45(11):20-24.
WEI Dong, XUE Tao, MENG Jiaguang, et al. Research on UHMWPE fiber modified by chromic acid[J]. Synthetic Fiber in China, 2016, 45(11): 20-24.
[7] DAYYOUB T, MAKSIMKIN A V, SENATOV F S, et al. Treating UHMWPE surface for enhancing the adhesion properties by cellulose grafting[J]. International Journal of Adhesion and Adhesives, 2020, 98: 102535.
[8] LIU H, PEI Y, XIE D, et al. Surface modification of ultra-high molecular weight polyethylene (UHMWPE) by argon plasma[J]. Applied Surface Science, 2010, 256(12): 3941-3945.
[9] 李焱,李常胜,黄献聪.电晕处理对UHMWPE纤维的性能影响[J].合成纤维工业,2010,33(3):36-38.
LI Yan, LI Changsheng, HUANG Xiancong. Effect of corona treatment on properties of UHMWPE fiber[J]. China Synthetic Fiber Industry, 2010, 33(3): 36-38.
[10] LEE H, DELLATORE S M, MILLER W M, et al. Mussel-inspired surface chemistry for multifunctional coatings[J]. Science, 2007, 318(5849): 426-430.
[11] WANG S, MA J, FENG X, et al. An effective surface modification of UHMWPE fiber for improving the interfacial adhesion of epoxy resin composites[J]. Polymer Compo-sites, 2020, 41(4): 1614-23.
[12] WEI Q, ZHANG F, LI J, et al. Oxidant-induced dopamine polymerization for multifunctional coatings[J]. Polymer Chemistry, 2010, 1(9): 1430-1433.
[13] 赵晗,尚晴,杨萌,等.邻苯二酚-四乙烯五胺改性超高分子量聚乙烯纤维[J].高分子学报,2020,51(3):287-294.
ZHAO Han, SHANG Qing, YANG Meng, et al. Surface modification of ultra-high molecular weight polyethylene fiber by catechol-tetraethylenepentamine[J]. Acta Poly-merica Sinica, 2020, 51(3): 287-294.
[14] MENG L, LI W, MA R, et al. Long UHMWPE fibers reinforced rigid polyurethane composites: An investigation in mechanical properties[J]. European Polymer Journal, 2018, 105: 55-60.
[15] LI W, HUANG M, MA R. Improved mechanical proper-ties of epoxy composites reinforced with surface-treated UHMWPE fibers[J]. Polymers for Advanced Techno-logies, 2018, 29(4): 1287-93.
[16] 卢文玉,蔡红珍,于文凡,等.硅烷偶联剂对高密度聚乙烯/甜高粱渣复合材料性能的增强机制[J].塑料科技,2021,49(7):61-65.
LU Wenyu, CAI Hongzhen, YU Wenfan, et al. Reinfor-cing mechanism of silane coupling agent on the properties of high density polyethylene/sweet sorghum slag composites[J]. Plastics Science and Technology, 2021,49(7):61-65.
[17] 冯霞,胡俊成,阿拉东.多巴胺仿生修饰及聚乙烯亚胺二次功能化表面改性超高分子量聚乙烯纤维[J].天津工业大学学报,2016,35(6):14-19.
FENG Xia, HU Juncheng, A Ladong. Surface modification of UHMWPE fibers by bio-dopamine and polyethylene imine second functionalization[J]. Journal of Tianjin Polytechnic University, 2016, 35(6): 14-19.
[18] TIAN Y, GUO L. Adhesion performance of UHMWPE fiber treated with polyethylene wax grafted methyl methacrylate alone or in conjunction with silane coupling agent[J]. Journal of Adhesion Science and Technology, 2020, 35(11): 1219-35.
[19] MINNICINO M A, SANTARE M H. Modeling the progressive damage of the microdroplet test using contact surfaces with cohesive behavior[J]. Composites Science and Technology, 2012, 72(16): 2024-2031.
[20] 何业茂,焦亚男,周庆,等.热塑性树脂基体对超高分子量聚乙烯纤维复合材料力学性能和抗弹道侵彻性能的影响[J].复合材料学报,2022,39(4):1570-1581.
HE Yemao, JIAO Yanan, ZHOU Qing, et al. Effects of thermoplastic resin matrix on mechanical properties and anti-penetration performance of ultra-high molecular weight polyethylene fiber composite[J]. Acta Materiae Compositae Sinica, 2022, 39(4): 1570-1581.

Preparation and interfacial properties of UHMWPE fibers modified by polyphenol & amino silane

多酚-氨基硅烷改性超高分子量聚乙烯纤维的制备及其界面性能

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

[1]	WANG Wei, LIN Siling, LI Long, MA Peipei, DONG Zijing, WU Lei. Preparation of a conductive polyester-cotton yarn and electric heating performance of its fabric [J]. Advanced Textile Technology, 2022, 30(4): 24-31.
[2]	GUO Qiaosheng, TANG Niannian, ZHAO Qin, KE Ting, YAO Yuyuan. Preparation and properties of polyester fiber modified bypolydopamine [J]. Advanced Textile Technology, 2022, 30(3): 52-59.
[3]	YU Lingxiao, LÜ Wangyang, WANG Gangqiang, CHEN Wenxing. Surface graft modification and antibacterial properties of UHMWPE fabrics [J]. Advanced Textile Technology, 2022, 30(2): 134-140.